Learn R Programming

bReeze (version 0.2-2)

bReeze-package: Functions for wind resource assessment

Description

A collection of functions to analyse, visualize and interpret wind data and to calculate the potential energy production of wind turbines.

Arguments

encoding

UTF-8

Details

lll{ Package: bReeze Type: Package Version: 0.2-2 Date: 2013-06-27 License: GPL (>=2) } Wind power is a global source of energy which attracts a large share of investments in renewables. Project sites with high wind potential do not only minimise the financial risk but increase the efficiency in carbon footprint reduction. Hence a thorough productivity analysis of a wind project is essential, regarding both economic and environmental aspects. The evaluation of the potential of a site requires a wind resource assessment, which is best based on data gained by a local measurement campaign. A methodology of processing the measured data has been established, resulting in a better understanding of the wind conditions of a site and therefore a more reliable estimation of energy production.

bReeze is a collection of widely used methods to analyse, visualise and interpret wind data. Wind resource analyses can subsequently be combined with characteristics of wind turbines to estimate the potential energy production on the investigated site.

Usually the data to be analysed are collected by meteorological masts (met masts) and averaged over ten minutes, but other time intervals are also processable. bReeze depends on two packages, written by other developers: RColorBrewer (by Erich Neuwirth) provides nice colours for the graphics. XML (by Duncan Temple Lang) provides xml parsing for power curve import. Try the examples below to check if bReeze has been correctly installed. Any question and feedback is welcome via email to .

References

The following handbook gives a detailed thematic overview and is available online:

Brower, M., Marcus, M., Taylor, M., Bernadett, D., Filippelli, M., Beaucage, P., Hale, E., Elsholz, K., Doane, J., Eberhard, M., Tensen, J., Ryan, D. (2010) Wind Resource Assessment Handbook. http://www.awstruepower.com/wp-content/uploads/2012/01/10-30_wind-resource-handbook.pdf

Further references are given under the specific functions of the package.

Examples

Run this code
# load example data
data(winddata)

# create two datasets
set40 <- createSet(height=40, v.avg=winddata[,2], v.std=winddata[,5],
  dir.avg=winddata[,14])
set30 <- createSet(height=30, v.avg=winddata[,6], v.std=winddata[,9],
  dir.avg=winddata[,16])

# format time stamp
ts <- formatTS(time.stamp=winddata[,1])

# create met mast object
metmast <- createMast(time.stamp=ts, set40=set40, set30=set30)

# plot time series of met mast signals
plotTimeSeries(mast=metmast)

# calculate frequency and mean wind speed per wind direction sector
freq <- frequency(mast=metmast, v.set=1)

# plot frequency
plotFrequency(freq=freq)

# calculate availability of pairs of wind speed and direction
availability(mast=metmast)

# calculate monthly means of wind speed
monthStats(mast=metmast)

# calculate turbulence intensity
turbulence(mast=metmast, turb.set=1)

# calculate weibull parameters
wb <- weibull(mast=metmast, v.set=1)

# calculate total wind energy content
energy(wb=wb)

# calculate wind profile
pf <- profile(mast=metmast, v.set=c(1,2), dir.set=1)

# import power curve
pc <- readPC(file=system.file(package="bReeze", "powercurves", 
  "Enercon_E126_7.5MW.pow"))

# calculate annual energy production
aep <- aep(profile=pf, pc=pc, hub.h=135)

# plot AEP
plotAep(aep)

Run the code above in your browser using DataLab