A call to setAs defines a method for coercing an object of
class from to class to. The methods will then be used
by calls to as for objects with class from,
including calls that replace part of the object.
Methods for this purpose work indirectly, by defining methods for
function coerce. The coerce function is not to
be called directly, and method selection uses class inheritance only
on the first argument.
setAs(from, to, def, replace, where = topenv(parent.frame()))The classes between which the coerce methods
def and replace perform coercion.
function of one argument. It will get an object from
class from and had better return an object of class
to. The convention is that
the name of the argument is from; if another argument name
is used, setAs will attempt to substitute from.
if supplied, the function to use as a replacement
method, when as is used on the left of an assignment.
Should be a function of two arguments, from, value,
although setAs will attempt to substitute if the arguments
differ.
The remaining argument will not be used in standard applications.
the position or environment in which to store the resulting methods. Do not use this argument when defining a method in a package. Only the default, the namespace of the package, should be used in normal situations.
Objects from one class can turn into objects from another class
either automatically or by an explicit call to the as
function. Automatic conversion is special, and comes from the
designer of one class of objects asserting that this class extends
another class. The most common case is that one or more class names
are supplied in the contains= argument to setClass, in
which case the new class extends each of the earlier classes (in the
usual terminology, the earlier classes are superclasses of
the new class and it is a subclass of each of them).
This form of inheritance is called simple inheritance in R.
See setClass for details.
Inheritance can also be defined explicitly by a call to
setIs.
The two versions have slightly different implications for coerce methods.
Simple inheritance implies that inherited slots behave identically in the subclass and the superclass.
Whenever two classes are related by simple inheritance, corresponding coerce methods
are defined for both direct and replacement use of as.
In the case of simple inheritance, these methods do the obvious
computation: they extract or replace the slots in the object that
correspond to those in the superclass definition.
The implicitly defined coerce methods may be overridden by a call
to setAs; note, however, that the implicit methods are defined for each
subclass-superclass pair, so that you must override each of these
explicitly, not rely on inheritance.
When inheritance is defined by a call to setIs, the coerce methods are provided explicitly, not generated automatically.
Inheritance will apply (to the from argument, as described in the section below).
You could also supply methods via setAs for non-inherited relationships, and now these also can be inherited.
For further on the distinction between simple and explicit inheritance, see setIs.
The function as turns object into an object
of class Class. In doing so, it applies a “coerce
method”, using S4
classes and methods, but in a somewhat special way.
Coerce methods are methods for the function coerce or, in the
replacement case the function `coerce<-`.
These functions have two arguments in method signatures, from
and to, corresponding to the class of the object and the
desired coerce class.
These functions must not be called directly, but are used to store
tables of methods for the use of as, directly and for
replacements.
In this section we will describe the direct case, but except where
noted the replacement case works the same way, using `coerce<-`
and the replace argument to setAs, rather than
coerce and the def argument.
Assuming the object is not already of the desired class,
as first looks for a method in the table of methods
for the function
coerce for the signature c(from = class(object), to =
Class), in the same way method selection would do its initial lookup.
To be precise, this means the table of both direct and inherited
methods, but inheritance is used specially in this case (see below).
If no method is found, as looks for one.
First, if either Class or class(object) is a superclass
of the other, the class definition will contain the information needed
to construct a coerce method.
In the usual case that the subclass contains the superclass (i.e., has
all its slots), the method is constructed either by extracting or
replacing the inherited slots.
Non-simple extensions (the result of a call to setIs)
will usually contain explicit methods, though possibly not for replacement.
If no subclass/superclass relationship provides a method, as
looks for an inherited method, but applying, inheritance for the argument from only, not for
the argument to (if you think about it, you'll probably agree
that you wouldn't want the result to be from some class other than the
Class specified). Thus,
selectMethod("coerce", sig, useInherited= c(from=TRUE, to= FALSE))
replicates the method selection used by as().
In nearly all cases the method found in this way will be cached in the
table of coerce methods (the exception being subclass relationships with a test, which
are legal but discouraged).
So the detailed calculations should be done only on the first
occurrence of a coerce from class(object) to Class.
Note that coerce is not a standard generic function. It is
not intended to be called directly. To prevent accidentally caching
an invalid inherited method, calls are routed to an equivalent call to
as, and a warning is issued. Also, calls to
selectMethod for this function may not represent the
method that as will choose. You can only trust the result if
the corresponding call to as has occurred previously in this
session.
With this explanation as background, the function setAs does a
fairly obvious computation: It constructs and sets a method for the function
coerce with signature c(from, to), using the def
argument to define the body of the method. The function supplied as
def can have one argument (interpreted as an object to be
coerced) or two arguments (the from object and the to
class). Either way, setAs constructs a function of two
arguments, with the second defaulting to the name of the to
class. The method will be called from as with the object
as the from argument and no to argument, with the default for this argument being the name of the intended
to class, so the method can use this information in messages.
The direct version of the as function also has a strict= argument that defaults to TRUE.
Calls during the evaluation of methods for other functions will set this argument to FALSE.
The distinction is relevant when the object being coerced is from a simple subclass of the to class; if strict=FALSE in this case, nothing need be done.
For most user-written coerce methods, when the two classes have no subclass/superclass, the strict= argument is irrelevant.
The replace argument to setAs provides a method for
`coerce<-`.
As with all replacement methods, the last argument of the method must
have the name value for the object on the right of the
assignment.
As with the coerce method, the first two arguments are
from, to; there is no strict= option for the replace case.
The function coerce exists as a repository for
such methods, to be selected as described above by the as
function. Actually dispatching the methods using
standardGeneric could produce incorrect inherited methods, by using
inheritance on the
to argument; as mentioned, this is not the logic used for
as.
To prevent selecting and caching invalid methods, calls to
coerce are
currently mapped into calls to as, with a warning message.
Methods are pre-defined for coercing any object to one of the basic
datatypes. For example, as(x, "numeric") uses the existing
as.numeric function. These built-in methods can be listed by
showMethods("coerce").
Chambers, John M. (2016) Extending R, Chapman & Hall. (Chapters 9 and 10.)
If you think of using try(as(x, cl)), consider
canCoerce(x, cl) instead.
# NOT RUN {
## using the definition of class "track" from \link{setClass}
# }
# NOT RUN {
setAs("track", "numeric", function(from) from@y)
t1 <- new("track", x=1:20, y=(1:20)^2)
as(t1, "numeric")
## The next example shows:
## 1. A virtual class to define setAs for several classes at once.
## 2. as() using inherited information
setClass("ca", slots = c(a = "character", id = "numeric"))
setClass("cb", slots = c(b = "character", id = "numeric"))
setClass("id")
setIs("ca", "id")
setIs("cb", "id")
setAs("id", "numeric", function(from) from@id)
CA <- new("ca", a = "A", id = 1)
CB <- new("cb", b = "B", id = 2)
setAs("cb", "ca", function(from, to )new(to, a=from@b, id = from@id))
as(CB, "numeric")
# }
Run the code above in your browser using DataLab