VGAM (version 1.1-5)

vglm.control: Control Function for vglm()

Description

Algorithmic constants and parameters for running vglm are set using this function.

Usage

vglm.control(checkwz = TRUE, Check.rank = TRUE, Check.cm.rank = TRUE,
             criterion = names(.min.criterion.VGAM),
             epsilon = 1e-07, half.stepsizing = TRUE,
             maxit = 30, noWarning = FALSE,
             stepsize = 1, save.weights = FALSE,
             trace = FALSE, wzepsilon = .Machine$double.eps^0.75,
             xij = NULL, ...)

Arguments

checkwz

logical indicating whether the diagonal elements of the working weight matrices should be checked whether they are sufficiently positive, i.e., greater than wzepsilon. If not, any values less than wzepsilon are replaced with this value.

Check.rank

logical indicating whether the rank of the VLM matrix should be checked. If this is not of full column rank then the results are not to be trusted. The default is to give an error message if the VLM matrix is not of full column rank.

Check.cm.rank

logical indicating whether the rank of each constraint matrix should be checked. If this is not of full column rank then an error will occur. Under no circumstances should any constraint matrix have a rank less than the number of columns.

criterion

character variable describing what criterion is to be used to test for convergence. The possibilities are listed in .min.criterion.VGAM, but most family functions only implement a few of these.

epsilon

positive convergence tolerance epsilon. Roughly speaking, the Newton-Raphson/Fisher-scoring iterations are assumed to have converged when two successive criterion values are within epsilon of each other.

half.stepsizing

logical indicating if half-stepsizing is allowed. For example, in maximizing a log-likelihood, if the next iteration has a log-likelihood that is less than the current value of the log-likelihood, then a half step will be taken. If the log-likelihood is still less than at the current position, a quarter-step will be taken etc. Eventually a step will be taken so that an improvement is made to the convergence criterion. half.stepsizing is ignored if criterion == "coefficients".

maxit

maximum number of (usually Fisher-scoring) iterations allowed. Sometimes Newton-Raphson is used.

noWarning

logical indicating whether to suppress a warning if convergence is not obtained within maxit iterations. This is ignored if maxit = 1 is set.

stepsize

usual step size to be taken between each Newton-Raphson/Fisher-scoring iteration. It should be a value between 0 and 1, where a value of unity corresponds to an ordinary step. A value of 0.5 means half-steps are taken. Setting a value near zero will cause convergence to be generally slow but may help increase the chances of successful convergence for some family functions.

save.weights

logical indicating whether the weights slot of a "vglm" object will be saved on the object. If not, it will be reconstructed when needed, e.g., summary. Some family functions have save.weights = TRUE and others have save.weights = FALSE in their control functions.

trace

logical indicating if output should be produced for each iteration. Setting trace = TRUE is recommended in general because VGAM fits a very broad variety of models and distributions, and for some of them, convergence is intrinsically more difficult. Monitoring convergence can help check that the solution is reasonable or that a problem has occurred. It may suggest better initial values are needed, the making of invalid assumptions, or that the model is inappropriate for the data, etc.

wzepsilon

small positive number used to test whether the diagonals of the working weight matrices are sufficiently positive.

xij

A formula or a list of formulas. Each formula has a RHS giving \(M\) terms making up a covariate-dependent term (whose name is the response). That is, it creates a variable that takes on different values for each linear/additive predictor, e.g., the ocular pressure of each eye. The \(M\) terms must be unique; use fill1, fill2, fill3, etc. if necessary. Each formula should have a response which is taken as the name of that variable, and the \(M\) terms are enumerated in sequential order. Each of the \(M\) terms multiply each successive row of the constraint matrix. When xij is used, the use of form2 is also required to give every term used by the model.

The function Select can be used to select variables beginning with the same character string.

…

other parameters that may be picked up from control functions that are specific to the VGAM family function.

Value

A list with components matching the input names. A little error checking is done, but not much. The list is assigned to the control slot of vglm objects.

Warning

For some applications the default convergence criterion should be tightened. Setting something like criterion = "coef", epsilon = 1e-09 is one way to achieve this, and also add trace = TRUE to monitor the convergence. Setting maxit to some higher number is usually not needed, and needing to do so suggests something is wrong, e.g., an ill-conditioned model, over-fitting or under-fitting.

Details

Most of the control parameters are used within vglm.fit and you will have to look at that to understand the full details.

Setting save.weights = FALSE is useful for some models because the weights slot of the object is the largest and so less memory is used to store the object. However, for some VGAM family function, it is necessary to set save.weights = TRUE because the weights slot cannot be reconstructed later.

References

Yee, T. W. and Hastie, T. J. (2003). Reduced-rank vector generalized linear models. Statistical Modelling, 3, 15--41.

See Also

vglm, fill1. The author's homepage has further documentation about the xij argument; see also Select.

Examples

# NOT RUN {
# Example 1.
pneumo <- transform(pneumo, let = log(exposure.time))
vglm(cbind(normal, mild, severe) ~ let, multinomial, data = pneumo,
     crit = "coef", step = 0.5, trace = TRUE, epsil = 1e-8, maxit = 40)


# Example 2. The use of the xij argument (simple case).
ymat <- rdiric(n <- 1000, shape = rep(exp(2), len = 4))
mydat <- data.frame(x1 = runif(n), x2 = runif(n), x3 = runif(n),
                    x4 = runif(n),
                    z1 = runif(n), z2 = runif(n), z3 = runif(n),
                    z4 = runif(n))
mydat <- transform(mydat, X = x1, Z = z1)
mydat <- round(mydat, digits = 2)
fit2 <- vglm(ymat ~ X + Z,
             dirichlet(parallel = TRUE), data = mydat, trace = TRUE,
             xij = list(Z ~ z1 + z2 + z3 + z4,
                        X ~ x1 + x2 + x3 + x4),
             form2 = ~  Z + z1 + z2 + z3 + z4 +
                        X + x1 + x2 + x3 + x4)
head(model.matrix(fit2, type =  "lm"))  # LM model matrix
head(model.matrix(fit2, type = "vlm"))  # Big VLM model matrix
coef(fit2)
coef(fit2, matrix = TRUE)
max(abs(predict(fit2)-predict(fit2, new = mydat)))  # Predicts correctly
summary(fit2)
# }
# NOT RUN {
# plotvgam(fit2, se = TRUE, xlab = "x1", which.term = 1)  # Bug!
# plotvgam(fit2, se = TRUE, xlab = "z1", which.term = 2)  # Bug!
plotvgam(fit2, xlab = "x1")  # Correct
plotvgam(fit2, xlab = "z1")  # Correct
# }
# NOT RUN {

# Example 3. The use of the xij argument (complex case).
set.seed(123)
coalminers <- transform(coalminers,
                        Age = (age - 42) / 5,
                        dum1 = round(runif(nrow(coalminers)), digits = 2),
                        dum2 = round(runif(nrow(coalminers)), digits = 2),
                        dum3 = round(runif(nrow(coalminers)), digits = 2),
                        dumm = round(runif(nrow(coalminers)), digits = 2))
BS <- function(x, ..., df = 3)
  sm.bs(c(x,...), df = df)[1:length(x),,drop = FALSE]
NS <- function(x, ..., df = 3)
  sm.ns(c(x,...), df = df)[1:length(x),,drop = FALSE]

# Equivalently...
BS <- function(x, ..., df = 3)
  head(sm.bs(c(x,...), df = df), length(x), drop = FALSE)
NS <- function(x, ..., df = 3)
  head(sm.ns(c(x,...), df = df), length(x), drop = FALSE)

fit3 <- vglm(cbind(nBnW,nBW,BnW,BW) ~ Age + NS(dum1, dum2),
             fam = binom2.or(exchangeable = TRUE, zero = 3),
             xij = list(NS(dum1, dum2) ~ NS(dum1, dum2) +
                                         NS(dum2, dum1) +
                                         fill(NS( dum1))),
             form2 = ~  NS(dum1, dum2) + NS(dum2, dum1) + fill(NS(dum1)) +
                        dum1 + dum2 + dum3 + Age + age + dumm,
             data = coalminers, trace = TRUE)
head(model.matrix(fit3, type = "lm"))   # LM model matrix
head(model.matrix(fit3, type = "vlm"))  # Big VLM model matrix
coef(fit3)
coef(fit3, matrix = TRUE)
# }
# NOT RUN {
plotvgam(fit3, se = TRUE, lcol = "red", scol = "blue", xlab = "dum1")
# }