DoseFinding (version 1.2-1)

drmodels: Built-in dose-response models in DoseFinding

Description

Dose-response model functions and gradients.

Below are the definitions of the model functions:

Emax model $$$$$$ f(d,\theta)=E_0+E_{max}\frac{d}{ED_{50}+d}$$

Sigmoid Emax Model $$$$$$ f(d,\theta)=E_0+E_{max}\frac{d^h}{ED^h_{50}+d^h}$$

Exponential Model $$$$$$ f(d,\theta)=E_0+E_1(\exp(d/\delta)-1)$$

Beta model $$$$$$ f(d,\theta)=E_0+E_{max}B(\delta_1,\delta_2)(d/scal)^{\delta_1}(1-d/scal)^{\delta_2} $$ $$$$ here $$B(\delta_1,\delta_2)=(\delta_1+\delta_2)^{\delta_1+\delta_2}/(\delta_1^{\delta_1} $$$$ \delta_2^{\delta_2})$$ and \(scal\) is a fixed dose scaling parameter.

Linear Model $$$$$$ f(d,\theta)=E_0+\delta d$$

Linear in log Model $$$$$$ f(d,\theta)=E_0+\delta \log(d + off)$$ here \(off\) is a fixed offset parameter.

Logistic Model $$ f(d, \theta) = E_0 + E_{\max}/\left\{1 + \exp\left[ \left(ED_{50} - d \right)/\delta \right] \right\}$$

Quadratic Model $$$$$$ f(d,\theta)=E_0+\beta_1d+\beta_2d^2$$ The standardized model equation for the quadratic model is \(d+\delta d^2\), with \(\delta=\beta_2/\beta_1\).

Linear Interpolation model
The linInt model provides linear interpolation at the values defined by the nodes vector. In virtually all situations the nodes vector is equal to the doses used in the analysis. For example the Mods and the fitMod function automatically use the doses that are used in the context of the function call as nodes. The guesstimates specified in the Mods function need to be the treatment effects at the active doses standardized to the interval [0,1] (see the examples in the Mods function).

Usage

emax(dose, e0, eMax, ed50)
emaxGrad(dose, eMax, ed50, ...)
sigEmax(dose, e0, eMax, ed50, h)
sigEmaxGrad(dose, eMax, ed50, h, ...)
exponential(dose, e0, e1, delta)
exponentialGrad(dose, e1, delta, ...)
quadratic(dose, e0, b1, b2)
quadraticGrad(dose, ...)
betaMod(dose, e0, eMax, delta1, delta2, scal)
betaModGrad(dose, eMax, delta1, delta2, scal, ...)
linear(dose, e0, delta)
linearGrad(dose, ...)
linlog(dose, e0, delta, off = 1)
linlogGrad(dose, off, ...)
logistic(dose, e0, eMax, ed50, delta)
logisticGrad(dose, eMax, ed50, delta, ...)
linInt(dose, resp, nodes)
linIntGrad(dose, resp, nodes, ...)

Value

Response value for model functions or matrix containing the gradient evaluations.

Arguments

dose

Dose variable

e0

For most models placebo effect. For logistic model left-asymptote parameter, corresponding to a basal effect level (not the placebo effect)

eMax

Beta Model: Maximum effect within dose-range
Emax, sigmoid Emax, logistic Model: Asymptotic maximum effect

ed50

Dose giving half of the asymptotic maximum effect

...

Just included for convenience in the gradient functions, so that for example quadratic(dose, e0=0, b1=1, b2=3) will not throw an error (although the gradient of the quadratic model is independent of e0, b1 and b2).

h

Hill parameter, determining the steepness of the model at the ED50

e1

Slope parameter for exponential model

delta

Exponential model: Parameter, controlling the convexity of the model.
Linear and linlog model: Slope parameter
Logistic model: Parameter controlling determining the steepness of the curve

b1

first parameter of quadratic model

b2

second parameter of quadratic model (controls, whether model is convex or concave)

delta1

delta1 parameter for beta model

delta2

delta2 parameter for beta model

scal

Scale parameter (treated as a fixed value, not estimated)

off

Offset value to avoid problems with dose=0 (treated as a fixed value, not estimated)

resp

Response values at the nodes for the linInt model

nodes

Interpolation nodes for the linear interpolation for the linInt model (treated as a fixed value, not estimated)

Details

The Emax model is used to represent monotone, concave dose-response shapes. To distinguish it from the more general sigmoid emax model it is sometimes also called hyperbolic emax model.

The sigmoid Emax model is an extension of the (hyperbolic) Emax model by introducing an additional parameter h, that determines the steepness of the curve at the ed50 value. The sigmoid Emax model describes monotonic, sigmoid dose-response relationships. In the toxicology literature this model is also called four-parameter log-logistic (4pLL) model.

The quadratic model is intended to capture a possible non-monotonic dose-response relationship.

The exponential model is intended to capture a possible sub-linear or a convex dose-response relationship.

The beta model is intended to capture non-monotone dose-response relationships and is more flexible than the quadratic model. The kernel of the beta model function consists of the kernel of the density function of a beta distribution on the interval [0,scal]. The parameter scal is not estimated but needs to be set to a value larger than the maximum dose. It can be set in most functions (fitMod, Mods) via the addArgs argument, when omitted a value of 1.2*(maximum dose) is used as default, where the maximum dose is inferred from other input to the respective function.

The linear in log-dose model is intended to capture concave shapes. The parameter off is not estimated in the code but set to a pre-specified value. It can be set in most functions (fitMod, Mods) via the addArgs argument, when omitted a value of 0.01*(maximum dose) is used as default, where the maximum dose is inferred from other input to the respective function.

The logistic model is intended to capture general monotone, sigmoid dose-response relationships. The logistic model and the sigmoid Emax model are closely related: The sigmoid Emax model is a logistic model in log(dose).

The linInt model provids linear interpolation of the means at the doses. This can be used as a "nonparametric" estimate of the dose-response curve, but is probably most interesting for specifying a "nonparametric" truth during planning and assess how well parametric models work under a nonparametric truth. For the function Mods and fitMod the interpolation nodes are selected equal to the dose-levels specified.

References

MacDougall, J. (2006). Analysis of dose-response studies - Emax model,in N. Ting (ed.), Dose Finding in Drug Development, Springer, New York, pp. 127--145

Pinheiro, J. C., Bretz, F. and Branson, M. (2006). Analysis of dose-response studies - modeling approaches, in N. Ting (ed.). Dose Finding in Drug Development, Springer, New York, pp. 146--171

See Also

fitMod

Examples

## some quadratic example shapes
quadModList <- Mods(quadratic = c(-0.5, -0.75, -0.85, -1), doses = c(0,1))
plotMods(quadModList)

## some emax example shapes
emaxModList <- Mods(emax = c(0.02,0.1,0.5,1), doses = c(0,1))
plotMods(emaxModList)
## example for gradient
emaxGrad(dose = (0:4)/4, eMax = 1, ed50 = 0.5)

## some sigmoid emax example shapes
sigEmaxModList <- Mods(sigEmax = rbind(c(0.05,1), c(0.15,3), c(0.4,8),
                       c(0.7,8)), doses = c(0,1))
plotMods(sigEmaxModList)
sigEmaxGrad(dose = (0:4)/4, eMax = 1, ed50 = 0.5, h = 8)

## some exponential example shapes
expoModList <- Mods(exponential = c(0.1,0.25,0.5,2), doses=c(0,1))
plotMods(expoModList)
exponentialGrad(dose = (0:4)/4, e1 = 1, delta = 2)

## some beta model example shapes
betaModList <- Mods(betaMod = rbind(c(1,1), c(1.5,0.75), c(0.8,2.5),
                    c(0.4,0.9)), doses=c(0,1), addArgs=list(scal = 1.2))
plotMods(betaModList)
betaModGrad(dose = (0:4)/4, eMax = 1, delta1 = 1, delta2 = 1, scal = 5)

## some logistic model example shapes
logistModList <- Mods(logistic = rbind(c(0.5,0.05), c(0.5,0.15),
                      c(0.2,0.05), c(0.2,0.15)), doses=c(0,1))
plotMods(logistModList)
logisticGrad(dose = (0:4)/4, eMax = 1, ed50 = 0.5, delta = 0.05)

## some linInt shapes
genModList <- Mods(linInt = rbind(c(0.5,1,1),
                      c(0,1,1), c(0,0,1)), doses=c(0,0.5,1,1.5))
plotMods(genModList)
linIntGrad(dose = (0:4)/4, resp=c(0,0.5,1,1,1), nodes=(0:4)/4)