StatMatch (version 1.2.0)

comb.samples: Statistical Matching of data from complex sample surveys

Description

This function permits to cross--tabulate two categorical variables, Y and Z, observed separately in two independent surveys (Y is collected in survey A and Z is collected in survey B) carried out on the same target population. The two surveys share a number of common variables X. When it is available a third survey C, carried on the same population, in which both Y and Z are collected, these data are used as a source of auxiliary information. The statistical matching is performed by carrying out calibration of the survey weights, as suggested in Renssen (1998). It is possible also to use the function to derive the estimates that units present a given category of the target variable (estimation are based on Liner Probability Models and are obtained as a by-product of the Renssen's method).

Usage

comb.samples(svy.A, svy.B, svy.C=NULL, y.lab, z.lab, form.x, 
              estimation=NULL, micro=FALSE, ...)

Arguments

svy.A

A svydesign Robject that stores the data collected in the survey A and all the information concerning the sampling design. This object can be created by using the function svydesign in

svy.B

A svydesign Robject that stores the data collected in the survey B and all the information concerning the sampling design. This object can be created by using the function svydesign in

svy.C

A svydesign Robject that stores the data collected in the the survey C and all the information concerning the sampling design. This object can be created by using the function svydesign

y.lab

A string providing the name of the Y variable, collected in survey A and in survey C (if available). The Y variable must be a categorical variable (factor or integer in R).

z.lab

A string providing the name of the Z variable collected in survey B and in survey C (if available). The Z variable must be a categorical variable (factor or integer in R).

form.x

A Rformula specifying the matching variables (subset of the X variables) collected in all the surveys, and how have to be considered in combining samples. For instance form.x=~x1+x2 means that the variables x1 and x2 have to be consid

estimation

A character string that identifies the method to be used to estimate the table of Y vs. Z when data from survey C are available. As suggested in Renssen (1998), two alternative methods are available: (i) Incomplete Two-Way Stratification (estimatio

micro

Predictions of Z in A and of Y in B are provided. In particular when Y and Z are both categorical variables it is provided the estimated probability that a unit presents a category of the given variable. These probabilities are estimated as a by-product

...

Further arguments that may be necessary for calibration. In particular, the argument calfun allows to specify the calibration function: (i) calfun="linear" for linear calibration (default); (ii) calfun="raking" to

Value

• A Rlist with the results of the calibration procedure according to the input arguments.
• yz.CIA
  The table of Y (y.lab) vs. Z (z.lab) estimated under the Conditional Independence Assumption (CIA).
• cal.C
  The survey object svy.C after the calibration. Only when svy.C is provided.
• yz.est
  The table of Y (y.lab) vs. Z (z.lab) estimated under the method specified via estimation argument. Only when svy.C is provided.
• Z.A
  Only when micro=TRUE. It is a data frame with the same rows as in svy.A and the number of columns is equal to the number of categories of the variable z.lab. Each row provides the estimated probabilities for that unit of presenting the various categories of z.lab.
• Y.B
  Only when micro=TRUE. It is a data frame with the same rows as in svy.B and the number of columns is equal to the number of categories of y.lab. Each row provides the estimated probabilities for that unit of presenting the various categories of y.lab.
• call
  Stores the call to this function with all the values specified for the various arguments (call=match.call()).

Details

This function estimates the contingency table of Y vs. Z by performing a series of calibrations of the survey weights. In practice the estimation is carried out on data in survey C by exploiting all the information from surveys A and B. When survey C is not available the table of Y vs. Z is estimated under the assumption of Conditional Independence (CIA), i.e. $p(Y,Z)=p(Y|\bold{X}) \times p(Z|\bold{X}) \times p(\bold{X})$. When data from survey C are available (Renssen, 1998), the table of Y vs. Z can be estimated by: Incomplete Two-Way Stratification (ITWS) or Synthetic Two-Way Stratification (STWS). In the first case (ITWS) the weights of the units in survey C are calibrated so that the new weights allow to reproduce the marginal distributions of Y estimated on survey A, and that of Z estimated on survey B. Note that the distribution of the X variables in survey A and in survey B, must be harmonized before performing ITWS (see harmonize.x). The Synthetic Two-Way Stratification allows to estimate the table of Y vs. Z by considering also the X variables observed in C. This method consists in correcting the table of Y vs. Z estimated under the CIA according to the relationship between Y and Z observed in survey C (for major details see Renssen, 1998). When the argument micro is set to TRUE the function provides also Z.A and Y.B. The first data.frame has the same rows as svy.A and the number of columns equals the number of categories of the Z variable specified via z.lab. Each row provides the estimated probabilities of assuming a value in the various categories. The same happens for Y.B which presents the estimated probabilities of assuming a category of y.lab for each unit in B. The estimated probabilities are obtained by applying the linear probability models (for major details see Renssen, 1998). Unfortunately, such models may provide estimated probabilities less than 0 or greater than 1. Much caution should be used in using such predictions for practical purposes.

References

D'Orazio, M., Di Zio, M. and Scanu, M. (2006). Statistical Matching: Theory and Practice. Wiley, Chichester. Renssen, R.H. (1998) Use of Statistical Matching Techniques in Calibration Estimation. Survey Methodology, 24, pp. 171--183.

See Also

calibrate, svydesign, harmonize.x

Examples

data(quine, package="MASS") #loads quine from MASS
str(quine)
quine$c.Days <- cut(quine$Days, c(-1, seq(0,20,10),100))
table(quine$c.Days)


# split quine in two subsets
set.seed(124)
lab.A <- sample(nrow(quine), 70, replace=TRUE)
quine.A <- quine[lab.A, c("Eth","Sex","Age","Lrn")]
quine.B <- quine[-lab.A, c("Eth","Sex","Age","c.Days")]

# create svydesign objects
require(survey)
quine.A$f <- 70/nrow(quine) # sampling fraction
quine.B$f <- (nrow(quine)-70)/nrow(quine)
svy.qA <- svydesign(~1, fpc=~f, data=quine.A)
svy.qB <- svydesign(~1, fpc=~f, data=quine.B)

# Harmonizazion wrt the joint distribution
# of ('Sex' x 'Age' x 'Eth')

# vector of population total known
# estimated from the full data set
# note the formula!
tot.m <- colSums(model.matrix(~Eth:Sex:Age-1, data=quine))
tot.m

out.hz <- harmonize.x(svy.A=svy.qA, svy.B=svy.qB, x.tot=tot.m,
            form.x=~Eth:Sex:Age-1, cal.method="linear")
            
# estimation of 'Lrn' vs. 'c.Days' under the CIA

svy.qA.h <- out.hz$cal.A
svy.qB.h <- out.hz$cal.B

out.1 <- comb.samples(svy.A=svy.qA.h, svy.B=svy.qB.h,
            svy.C=NULL, y.lab="Lrn", z.lab="c.Days",
            form.x=~Eth:Sex:Age-1)

out.1$yz.CIA
addmargins(out.1$yz.CIA)

#
# incomplete two-way stratification

# select a sample C from quine
# and define a survey object

set.seed(4321)
lab.C <- sample(nrow(quine), 50, replace=TRUE)
quine.C <- quine[lab.C, c("Lrn","c.Days")]
quine.C$f <- 50/nrow(quine) # sampling fraction
svy.qC <- svydesign(~1, fpc=~f, data=quine.C)

# call comb.samples
out.2 <- comb.samples(svy.A=svy.qA.h, svy.B=svy.qB.h,
            svy.C=svy.qC, y.lab="Lrn", z.lab="c.Days",
            form.x=~Eth:Sex:Age-1, estimation="incomplete",
            calfun="linear", maxit=100)

summary(weights(out.2$cal.C))
out.2$yz.est # estimated table of 'Lrn' vs. 'c.Days'
# difference wrt the table 'Lrn' vs. 'c.Days' under CIA
addmargins(out.2$yz.est)-addmargins(out.2$yz.CIA)

# synthetic two-way stratification
# only macro estimation

quine.C <- quine[lab.C, ]
quine.C$f <- 50/nrow(quine) # sampling fraction
svy.qC <- svydesign(~1, fpc=~f, data=quine.C)

out.3 <- comb.samples(svy.A=svy.qA.h, svy.B=svy.qB.h,
            svy.C=svy.qC, y.lab="Lrn", z.lab="c.Days",
            form.x=~Eth:Sex:Age-1, estimation="synthetic",
            calfun="linear",bounds=c(.5,Inf), maxit=100)

summary(weights(out.3$cal.C))

out.3$yz.est # estimated table of 'Lrn' vs. 'c.Days'
# difference wrt the table of 'Lrn' vs. 'c.Days' under CIA
addmargins(out.3$yz.est)-addmargins(out.3$yz.CIA)
# diff wrt the table of 'Lrn' vs. 'c.Days' under incomplete 2ws
addmargins(out.3$yz.est)-addmargins(out.2$yz.CIA)

# synthetic two-way stratification
# with micro predictions

out.4 <- comb.samples(svy.A=svy.qA.h, svy.B=svy.qB.h,
            svy.C=svy.qC, y.lab="Lrn", z.lab="c.Days",
            form.x=~Eth:Sex:Age-1, estimation="synthetic",
            micro=TRUE, calfun="linear",bounds=c(.5,Inf), 
            maxit=100)
            
head(out.4$Z.A)
head(out.4$Y.B)