If you are creating a new geom, stat, position, or scale in another package,
you'll need to extend from ggplot2::Geom, ggplot2::Stat,
ggplot2::Position, or ggplot2::Scale.
All geom_* functions (like geom_point) return a layer that
contains a Geom* object (like GeomPoint). The Geom*
object is responsible for rendering the data in the plot.
Each of the Geom* objects is a ggproto() object, descended
from the top-level Geom, and each implements various methods and
fields.
Compared to Stat and Position, Geom is a little
different because the execution of the setup and compute functions is
split up. setup_data runs before position adjustments, and
draw_layer is not run until render time, much later. This
means there is no setup_params because it's hard to communicate
the changes.
To create a new type of Geom object, you typically will want to override one or more of the following:
Either draw_panel(self, data, panel_params, coord) or
draw_group(self, data, panel_params, coord). draw_panel is
called once per panel, draw_group is called once per group.
Use draw_panel if each row in the data represents a
single element. Use draw_group if each group represents
an element (e.g. a smooth, a violin).
data is a data frame of scaled aesthetics.
panel_params is a set of per-panel parameters for the
coord. Generally, you should consider panel_params
to be an opaque data structure that you pass along whenever you call
a coord method.
You must always call coord$transform(data, panel_params) to
get the (position) scaled data for plotting. To work with
non-linear coordinate systems, you typically need to convert into a
primitive geom (e.g. point, path or polygon), and then pass on to the
corresponding draw method for munching.
Must return a grob. Use zeroGrob() if there's nothing to
draw.
draw_key: Renders a single legend key.
required_aes: A character vector of aesthetics needed to
render the geom.
default_aes: A list (generated by aes() of
default values for aesthetics.
setup_data: Converts width and height to xmin and xmax,
and ymin and ymax values. It can potentially set other values as well.
All coord_* functions (like coord_trans) return a Coord*
object (like CoordTrans).
Each of the Coord* objects is a ggproto() object,
descended from the top-level Coord. To create a new type of Coord
object, you typically will want to implement one or more of the following:
aspect: Returns the desired aspect ratio for the plot.
labels: Returns a list containing labels for x and y.
render_fg: Renders foreground elements.
render_bg: Renders background elements.
render_axis_h: Renders the horizontal axes.
render_axis_v: Renders the vertical axes.
backtransform_range(panel_params): Extracts the panel range provided
in panel_params (created by setup_panel_params(), see below) and
back-transforms to data coordinates. This back-transformation can be needed
for coords such as coord_trans() where the range in the transformed
coordinates differs from the range in the untransformed coordinates. Returns
a list of two ranges, x and y, and these correspond to the variables
mapped to the x and y aesthetics, even for coords such as coord_flip()
where the x aesthetic is shown along the y direction and vice versa.
range(panel_params): Extracts the panel range provided
in panel_params (created by setup_panel_params(), see below) and
returns it. Unlike backtransform_range(), this function does not perform
any back-transformation and instead returns final transformed coordinates. Returns
a list of two ranges, x and y, and these correspond to the variables
mapped to the x and y aesthetics, even for coords such as coord_flip()
where the x aesthetic is shown along the y direction and vice versa.
transform: Transforms x and y coordinates.
distance: Calculates distance.
is_linear: Returns TRUE if the coordinate system is
linear; FALSE otherwise.
is_free: Returns TRUE if the coordinate system supports free
positional scales; FALSE otherwise.
setup_panel_params(scale_x, scale_y, params): Determines the appropriate
x and y ranges for each panel, and also calculates anything else needed to
render the panel and axes, such as tick positions and labels for major
and minor ticks. Returns all this information in a named list.
setup_data(data, params): Allows the coordinate system to
manipulate the plot data. Should return list of data frames.
setup_layout(layout, params): Allows the coordinate
system to manipulate the layout data frame which assigns
data to panels and scales.
All facet_* functions returns a Facet object or an object of a
Facet subclass. This object describes how to assign data to different
panels, how to apply positional scales and how to lay out the panels, once
rendered.
Extending facets can range from the simple modifications of current facets,
to very laborious rewrites with a lot of gtable() manipulation.
For some examples of both, please see the extension vignette.
Facet subclasses, like other extendible ggproto classes, have a range
of methods that can be modified. Some of these are required for all new
subclasses, while other only need to be modified if need arises.
The required methods are:
compute_layout: Based on layer data compute a mapping between
panels, axes, and potentially other parameters such as faceting variable
level etc. This method must return a data.frame containing at least the
columns PANEL, SCALE_X, and SCALE_Y each containing
integer keys mapping a PANEL to which axes it should use. In addition the
data.frame can contain whatever other information is necessary to assign
observations to the correct panel as well as determining the position of
the panel.
map_data: This method is supplied the data for each layer in
turn and is expected to supply a PANEL column mapping each row to a
panel defined in the layout. Additionally this method can also add or
subtract data points as needed e.g. in the case of adding margins to
facet_grid.
draw_panels: This is where the panels are assembled into a
gtable object. The method receives, among others, a list of grobs
defining the content of each panel as generated by the Geoms and Coord
objects. The responsibility of the method is to decorate the panels with
axes and strips as needed, as well as position them relative to each other
in a gtable. For some of the automatic functions to work correctly, each
panel, axis, and strip grob name must be prefixed with "panel", "axis", and
"strip" respectively.
In addition to the methods described above, it is also possible to override the default behaviour of one or more of the following methods:
setup_params:
init_scales: Given a master scale for x and y, create panel
specific scales for each panel defined in the layout. The default is to
simply clone the master scale.
train_scales: Based on layer data train each set of panel
scales. The default is to train it on the data related to the panel.
finish_data: Make last-minute modifications to layer data
before it is rendered by the Geoms. The default is to not modify it.
draw_back: Add a grob in between the background defined by the
Coord object (usually the axis grid) and the layer stack. The default is to
return an empty grob for each panel.
draw_front: As above except the returned grob is placed
between the layer stack and the foreground defined by the Coord object
(usually empty). The default is, as above, to return an empty grob.
draw_labels: Given the gtable returned by draw_panels,
add axis titles to the gtable. The default is to add one title at each side
depending on the position and existence of axes.
All extension methods receive the content of the params field as the params
argument, so the constructor function will generally put all relevant
information into this field. The only exception is the shrink
parameter which is used to determine if scales are retrained after Stat
transformations has been applied.
All stat_* functions (like stat_bin) return a layer that
contains a Stat* object (like StatBin). The Stat*
object is responsible for rendering the data in the plot.
Each of the Stat* objects is a ggproto() object, descended
from the top-level Stat, and each implements various methods and
fields. To create a new type of Stat object, you typically will want to
override one or more of the following:
One of :
compute_layer(self, data, scales, ...),
compute_panel(self, data, scales, ...), or
compute_group(self, data, scales, ...).
compute_layer() is called once per layer, compute_panel_()
is called once per panel, and compute_group() is called once per
group. All must return a data frame.
It's usually best to start by overriding compute_group: if
you find substantial performance optimisations, override higher up.
You'll need to read the source code of the default methods to see
what else you should be doing.
data is a data frame containing the variables named according
to the aesthetics that they're mapped to. scales is a list
containing the x and y scales. There functions are called
before the facets are trained, so they are global scales, not local
to the individual panels.... contains the parameters returned by
setup_params().
finish_layer(data, params): called once for each layer. Used
to modify the data after scales has been applied, but before the data is
handed of to the geom for rendering. The default is to not modify the
data. Use this hook if the stat needs access to the actual aesthetic
values rather than the values that are mapped to the aesthetic.
setup_params(data, params): called once for each layer.
Used to setup defaults that need to complete dataset, and to inform
the user of important choices. Should return list of parameters.
setup_data(data, params): called once for each layer,
after setup_params(). Should return modified data.
Default methods removes all rows containing a missing value in
required aesthetics (with a warning if !na.rm).
required_aes: A character vector of aesthetics needed to
render the geom.
default_aes: A list (generated by aes() of
default values for aesthetics.
All position_* functions (like position_dodge) return a
Position* object (like PositionDodge). The Position*
object is responsible for adjusting the position of overlapping geoms.
The way that the position_* functions work is slightly different from
the geom_* and stat_* functions, because a position_*
function actually "instantiates" the Position* object by creating a
descendant, and returns that.
Each of the Position* objects is a ggproto() object,
descended from the top-level Position, and each implements the
following methods:
compute_layer(self, data, params, panel) is called once
per layer. panel is currently an internal data structure, so
this method should not be overridden.
compute_panel(self, data, params, scales) is called once per
panel and should return a modified data frame.
data is a data frame containing the variables named according
to the aesthetics that they're mapped to. scales is a list
containing the x and y scales. There functions are called
before the facets are trained, so they are global scales, not local
to the individual panels. params contains the parameters returned by
setup_params().
setup_params(data, params): called once for each layer.
Used to setup defaults that need to complete dataset, and to inform
the user of important choices. Should return list of parameters.
setup_data(data, params): called once for each layer,
after setup_params(). Should return modified data.
Default checks that required aesthetics are present.
And the following fields
required_aes: a character vector giving the aesthetics
that must be present for this position adjustment to work.
All scale_* functions (like scale_x_continuous) return a
Scale* object (like ScaleContinuous). The Scale*
object represents a single scale.
Each of the Scale* objects is a ggproto() object,
descended from the top-level Scale.
ggproto