Hierarchical Bayesian Modeling of the Iowa Gambling Task using Prospect Valence Learning (PVL) Decay-RI.
It has the following parameters: A (decay rate), alpha (outcome sensitivity), cons (response consistency), lambda (loss aversion).
Task: Iowa Gambling Task (Ahn et al., 2008)
Model: Prospect Valence Learning (PVL) Decay-RI (Ahn et al., 2014)
igt_pvl_decay(
data = NULL,
niter = 4000,
nwarmup = 1000,
nchain = 4,
ncore = 1,
nthin = 1,
inits = "vb",
indPars = "mean",
modelRegressor = FALSE,
vb = FALSE,
inc_postpred = FALSE,
adapt_delta = 0.95,
stepsize = 1,
max_treedepth = 10,
...
)A class "hBayesDM" object modelData with the following components:
Character value that is the name of the model (\code"igt_pvl_decay").
Data.frame containing the summarized parameter values (as specified by
indPars) for each subject.
List object containing the posterior samples over different parameters.
A class stanfit object that contains the fitted Stan
model.
Data.frame containing the raw data used to fit the model, as specified by the user.
List object containing the extracted model-based regressors.
Data to be modeled. It should be given as a data.frame object,
a filepath for a tab-seperated txt file, "example" to use example data, or
"choose" to choose data with an interactive window.
Columns in the dataset must include:
"subjID", "choice", "gain", "loss". See Details below for more information.
Number of iterations, including warm-up. Defaults to 4000.
Number of iterations used for warm-up only. Defaults to 1000.
Number of Markov chains to run. Defaults to 4.
Number of CPUs to be used for running. Defaults to 1.
Every i == nthin sample will be used to generate the posterior distribution.
Defaults to 1. A higher number can be used when auto-correlation within the MCMC sampling is
high.
Character value specifying how the initial values should be generated. Possible options are "vb" (default), "fixed", "random", or your own initial values.
Character value specifying how to summarize individual parameters. Current options are: "mean", "median", or "mode".
Whether to export model-based regressors (TRUE or FALSE).
Not available for this model.
Use variational inference to approximately draw from a posterior distribution. Defaults
to FALSE.
Include trial-level posterior predictive simulations in model output (may greatly increase file
size). Defaults to FALSE.
If set to TRUE, it includes: "y_pred"
Floating point value representing the target acceptance probability of a new sample in the MCMC chain. Must be between 0 and 1. See Details below.
Integer value specifying the size of each leapfrog step that the MCMC sampler can take on each new iteration. See Details below.
Integer value specifying how many leapfrog steps the MCMC sampler can take on each new iteration. See Details below.
For this model, it's possible to set model-specific argument(s) as follows:
Raw payoffs within data are divided by this number. Used for scaling data. Defaults to 100.
This section describes some of the function arguments in greater detail.
data should be assigned a character value specifying the full path and name (including
extension information, e.g. ".txt") of the file that contains the behavioral data-set of all
subjects of interest for the current analysis. The file should be a tab-delimited text
file, whose rows represent trial-by-trial observations and columns represent variables.
For the Iowa Gambling Task, there should be 4 columns of data with the
labels "subjID", "choice", "gain", "loss". It is not necessary for the columns to be in this particular order,
however it is necessary that they be labeled correctly and contain the information below:
A unique identifier for each subject in the data-set.
Integer indicating which deck was chosen on that trial (where A==1, B==2, C==3, and D==4).
Floating point value representing the amount of currency won on that trial (e.g. 50, 100).
Floating point value representing the amount of currency lost on that trial (e.g. 0, -50).
*Note: The file may contain other columns of data (e.g. "ReactionTime", "trial_number", etc.), but only the data within the column names listed above will be used during the modeling. As long as the necessary columns mentioned above are present and labeled correctly, there is no need to remove other miscellaneous data columns.
nwarmup is a numerical value that specifies how many MCMC samples should not be stored
upon the beginning of each chain. For those familiar with Bayesian methods, this is equivalent
to burn-in samples. Due to the nature of the MCMC algorithm, initial values (i.e. where the
sampling chains begin) can have a heavy influence on the generated posterior distributions. The
nwarmup argument can be set to a high number in order to curb the effects that initial
values have on the resulting posteriors.
nchain is a numerical value that specifies how many chains (i.e. independent sampling
sequences) should be used to draw samples from the posterior distribution. Since the posteriors
are generated from a sampling process, it is good practice to run multiple chains to ensure
that a reasonably representative posterior is attained. When the sampling is complete, it is
possible to check the multiple chains for convergence by running the following line of code:
plot(output, type = "trace"). The trace-plot should resemble a "furry caterpillar".
nthin is a numerical value that specifies the "skipping" behavior of the MCMC sampler,
using only every i == nthin samples to generate posterior distributions. By default,
nthin is equal to 1, meaning that every sample is used to generate the posterior.
Control Parameters: adapt_delta, stepsize, and max_treedepth are
advanced options that give the user more control over Stan's MCMC sampler. It is recommended
that only advanced users change the default values, as alterations can profoundly change the
sampler's behavior. Refer to 'The No-U-Turn Sampler: Adaptively Setting Path Lengths in
Hamiltonian Monte Carlo (Hoffman & Gelman, 2014, Journal of Machine Learning Research)' for
more information on the sampler control parameters. One can also refer to 'Section 34.2. HMC
Algorithm Parameters' of the Stan User's Guide
and Reference Manual, or to the help page for stan for a less technical
description of these arguments.
Ahn, W. Y., Busemeyer, J. R., & Wagenmakers, E. J. (2008). Comparison of decision learning models using the generalization criterion method. Cognitive Science, 32(8), 1376-1402. https://doi.org/10.1080/03640210802352992
Ahn, W.-Y., Vasilev, G., Lee, S.-H., Busemeyer, J. R., Kruschke, J. K., Bechara, A., & Vassileva, J. (2014). Decision-making in stimulant and opiate addicts in protracted abstinence: evidence from computational modeling with pure users. Frontiers in Psychology, 5, 1376. https://doi.org/10.3389/fpsyg.2014.00849
We refer users to our in-depth tutorial for an example of using hBayesDM: https://rpubs.com/CCSL/hBayesDM
if (FALSE) {
# Run the model with a given data.frame as df
output <- igt_pvl_decay(
data = df, niter = 2000, nwarmup = 1000, nchain = 4, ncore = 4)
# Run the model with example data
output <- igt_pvl_decay(
data = "example", niter = 2000, nwarmup = 1000, nchain = 4, ncore = 4)
# Visually check convergence of the sampling chains (should look like 'hairy caterpillars')
plot(output, type = "trace")
# Check Rhat values (all Rhat values should be less than or equal to 1.1)
rhat(output)
# Plot the posterior distributions of the hyper-parameters (distributions should be unimodal)
plot(output)
# Show the WAIC and LOOIC model fit estimates
printFit(output)
}
Run the code above in your browser using DataLab