Uploads a part in a multipart upload.
In this operation, you provide part data in your request. However, you
have an option to specify your existing Amazon S3 object as a data
source for the part you are uploading. To upload a part from an existing
object, you use the upload_part_copy
operation.
You must initiate a multipart upload (see
create_multipart_upload
) before you can
upload any part. In response to your initiate request, Amazon S3 returns
an upload ID, a unique identifier, that you must include in your upload
part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. Each part must be at least 5 MB in size, except the last part. There is no size limit on the last part of your multipart upload.
To ensure that data is not corrupted when traversing the network,
specify the Content-MD5
header in the upload part request. Amazon S3
checks the part data against the provided MD5 value. If they do not
match, Amazon S3 returns an error.
If the upload request is signed with Signature Version 4, then AWS S3
uses the x-amz-content-sha256
header as a checksum instead of
Content-MD5
. For more information see Authenticating Requests: Using the Authorization Header (AWS Signature Version 4).
Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the Amazon Simple Storage Service Developer Guide .
For information on the permissions required to use the multipart upload API, go to Multipart Upload API and Permissions in the Amazon Simple Storage Service Developer Guide.
You can optionally request server-side encryption where Amazon S3
encrypts your data as it writes it to disks in its data centers and
decrypts it for you when you access it. You have the option of providing
your own encryption key, or you can use the AWS managed encryption keys.
If you choose to provide your own encryption key, the request headers
you provide in the request must match the headers you used in the
request to initiate the upload by using
create_multipart_upload
. For more
information, go to Using Server-Side Encryption
in the Amazon Simple Storage Service Developer Guide.
Server-side encryption is supported by the S3 Multipart Upload actions.
Unless you are using a customer-provided encryption key, you don't need
to specify the encryption parameters in each UploadPart request.
Instead, you only need to specify the server-side encryption parameters
in the initial Initiate Multipart request. For more information, see
create_multipart_upload
.
If you requested server-side encryption using a customer-provided encryption key in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
Special Errors
Code: NoSuchUpload
Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Related Resources
create_multipart_upload
complete_multipart_upload
abort_multipart_upload
list_parts
list_multipart_uploads
s3_upload_part(Body, Bucket, ContentLength, ContentMD5, Key, PartNumber,
UploadId, SSECustomerAlgorithm, SSECustomerKey, SSECustomerKeyMD5,
RequestPayer, ExpectedBucketOwner)
A list with the following syntax:
list(
ServerSideEncryption = "AES256"|"aws:kms",
ETag = "string",
SSECustomerAlgorithm = "string",
SSECustomerKeyMD5 = "string",
SSEKMSKeyId = "string",
BucketKeyEnabled = TRUE|FALSE,
RequestCharged = "requester"
)
Object data.
[required] The name of the bucket to which the multipart upload was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.
The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.
[required] Object key for which the multipart upload was initiated.
[required] Part number of part being uploaded. This is a positive integer between 1 and 10,000.
[required] Upload ID identifying the multipart upload whose part is being uploaded.
Specifies the algorithm to use to when encrypting the object (for example, AES256).
Specifies the customer-provided encryption key for Amazon S3 to use in
encrypting data. This value is used to store the object and then it is
discarded; Amazon S3 does not store the encryption key. The key must be
appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header
. This must be
the same encryption key specified in the initiate multipart upload
request.
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
The account id of the expected bucket owner. If the bucket is owned by a
different account, the request will fail with an HTTP
403 (Access Denied)
error.
svc$upload_part(
Body = raw,
Bucket = "string",
ContentLength = 123,
ContentMD5 = "string",
Key = "string",
PartNumber = 123,
UploadId = "string",
SSECustomerAlgorithm = "string",
SSECustomerKey = raw,
SSECustomerKeyMD5 = "string",
RequestPayer = "requester",
ExpectedBucketOwner = "string"
)
if (FALSE) {
# The following example uploads part 1 of a multipart upload. The example
# specifies a file name for the part data. The Upload ID is same that is
# returned by the initiate multipart upload.
svc$upload_part(
Body = "fileToUpload",
Bucket = "examplebucket",
Key = "examplelargeobject",
PartNumber = "1",
UploadId = "xadcOB_7YPBOJuoFiQ9cz4P3Pe6FIZwO4f7wN93uHsNBEw97pl5eNwzExg0LA..."
)
}
Run the code above in your browser using DataLab