quantreg (version 5.34)

Peirce: C.S. Peirce's Auditory Response Data

Description

Data from sequence experiments conducted by C.S. Pierce in 1872 to determine the distribution of response times to an auditory stimulus.

Usage

data(Peirce)

Format

A link{list} of 24 objects each representing one day of the experiment. Each element of the list consists of three components: the date the measurements were made, an x component recording the response time in milliseconds, and an associated y component recording a count of the number of times that the response was recorded to be equal to be equal to the corresponding x entry. There are roughly 500 observations (counts) on each of the 24 days.

Details

A detailed description of the experiment can be found in Peirce (1873). A young man of about 18 with no prior experience was employed to respond to a signal ``consisting of a sharp sound like a rap, the answer being made upon a telegraph-operator's key nicely adjusted.'' The response times, made with the aid of a Hipp cronoscope were recorded to the nearest millisecond. The data was analyzed by Peirce who concluded that after the first day, when the the observer was entirely inexperienced, the curves representing the densities of the response times ``differed very little from that derived from the theory of least squares,'' i.e. from the Gaussian density.

The data was subsequently analysed by Samama, in a diploma thesis supervised by Maurice Frechet, who reported briefly the findings in Frechet (1924), and by Wilson and Hilferty (1929). In both instances the reanalysis showed that Laplace's first law of error, the double exponential distribution, was a better representation for the data than was the Gaussian law. Koenker (2009) constains further discussion and an attempt to reproduce the Wilson and Hilferty analysis.

The data is available in two formats: The first in a "raw" form as 24 text files as scanned from the reprinted Peirce source, the second as an R dataset Peirce.rda containing the list. Only the latter is provided here, for the raw data and how to read see the more complete archive at: http://www.econ.uiuc.edu/~roger/research/frechet/frechet.html See the examples section below for some details on provisional attempt to reproduce part of the Wilson and Hilferty analysis. An open question regarding the dataset is: How did Wilson and Hilferty compute standard deviations for the median as they appear in their table? The standard textbook suggestion of Yule (1917) yields far too small a bandwidth. The methods employed in the example section below, which rely on relatively recent proposals, are somewhat closer, but still deviate somewhat from the results reported by Wilson and Hilferty.

References

Fr\'echet, M. (1924): ``Sur la loi des erreurs d'observation,'' Matematichiskii Sbornik, 32, 5--8. Koenker, R. (2009): ``The Median is the Message: Wilson and Hilferty's Reanalysis of C.S. Peirce's Experiments on the Law of Errors,'' American Statistician, 63, 20-25. Wilson, E.~B., and M.~M. Hilferty (1929): ``Note on C.S. Peirces Experimental Discussion of the Law of Errors,'' Proceedings of the National Academy of Sciences of the U.S.A., 15, 120--125. Yule, G.~U. (1917): An Introduction to the Theory of Statistics. Charles Griffen: London, 4 edn.

Examples

# NOT RUN {
# Make table like Wilson and Hilferty

data("Peirce")
set.seed(10) #Dither the counts
tab <- matrix(0,24,11)
for(i in 1:24){
	y <- rep(Peirce[[i]]$x, Peirce[[i]]$y) + runif(sum(Peirce[[i]]$y), -.5, .5)
	f1 <- summary(rq(y~1),se="iid")$coef[1:2]
	n <- length(y)
	f0 <- 1/(2 * sum(abs(y-f1[1])/n)) #Laplace proposal
	f0 <- (1/(2 * f0))/ sqrt(n)
	f2 <- summary(lm(y~1))$coef[1:2]
	outm <- sum(y < (f1[1] - 3.1 * sqrt(n) * f2[2]))
	outp <- sum(y > (f1[1] + 3.1 * sqrt(n) * f2[2]))
	outt <- outm + outp
	inm <- y > (f1[1] - 0.25 * sqrt(n) * f2[2])
	inp <- y < (f1[1] + 0.25 * sqrt(n) * f2[2])
	int <- sum(inm * inp)
	Eint <- round(n * (pnorm(.25) - pnorm(-.25)))
	excess <- round(100*(int - Eint)/Eint)
	tab[i,] <- c(f1, f0, f2, outm, outp, outt,int,Eint,excess)
	cnames <- c("med","sdmed1","sdmed0","mean","sdmean","below","above","outliers",
		"inliers","Einliers","ExcessIns")
	dimnames(tab) <- list(paste("Day",1:24),cnames)
	}
# }