A number of functions in the psych package will generate simulated data with particular structures. These functions include
sim for a factor simplex, and sim.simplex for a data simplex, sim.circ for a circumplex structure, sim.congeneric for a one factor factor congeneric model, sim.dichot to simulate dichotomous items, sim.hierarchical to create a hierarchical factor model, sim.item a more general item simulation,
sim.minor to simulate major and minor factors,
sim.omega to test various examples of omega,
sim.parallel to compare the efficiency of various ways of deterimining the number of factors. See the help pages for some more simulation functions here:
sim.rasch to create simulated rasch data,
sim.irt to create general 1 to 4 parameter IRT data by calling
sim.npl 1 to 4 parameter logistic IRT or
sim.npn 1 to 4 paramater normal IRT,
sim.poly to create polytomous ideas by calling
sim.poly.npn 1-4 parameter polytomous normal theory items or
sim.poly.npl 1-4 parameter polytomous logistic items, and
sim.poly.ideal which creates data following an ideal point or unfolding model by calling
sim.poly.ideal.npn 1-4 parameter polytomous normal theory ideal point model or
sim.poly.ideal.npl 1-4 parameter polytomous logistic ideal point model.
sim.structural a general simulation of structural models, and sim.anova for ANOVA and lm simulations, and sim.VSS. Some of these functions are separately documented and are listed here for ease of the help function. See each function for more detailed help.
sim(fx=NULL,Phi=NULL,fy=NULL,alpha=.8,lambda = 0,n=0,mu=NULL,raw=TRUE)
sim.simplex(nvar =12, alpha=.8,lambda=0,beta=1,mu=NULL, n=0)
sim.minor(nvar=12,nfact=3,n=0,g=NULL,fbig=NULL,fsmall = c(-.2,.2),bipolar=TRUE)The measurement model for x. If NULL, a 4 factor model is generated
The structure matrix of the latent variables
The measurement model for y
The means structure for the fx factors
Number of cases to simulate. If n=0 or NULL, the population matrix is returned.
if raw=TRUE, raw data are returned as well.
Number of variables for a simplex structure
Number of large factors to simulate in sim.minor,number of group factors in sim.general,sim.omega
General factor correlations in sim.general and general factor loadings in sim.omega and sim.minor
the base correlation for an autoregressive simplex
the trait component of a State Trait Autoregressive Simplex
Test reliability of a STARS simplex
Factor loadings for the main factors. Default is a simple structure with loadings sampled from (.8,.6) for nvar/nfact variables and 0 for the remaining. If fbig is specified, then each factor has loadings sampled from it.
if TRUE, then positive and negative loadings are generated from fbig
nvar/2 small factors are generated with loadings sampled from (-.2,0,.2)
Simulation of data structures is a very useful tool in psychometric research and teaching. By knowing ``truth" it is possible to see how well various algorithms can capture it. For a much longer discussion of the use of simulation in psychometrics, see the accompany vignettes.
The simulations documented here are the core set of functions. Others are documented in other help files.
sim simulates one (fx) or two (fx and fy) factor structures where both fx and fy respresent factor loadings of variables. The use of fy is particularly appropriate for simulating sem models. This is better documentated in the help for sim.structural.
Perhaps the easist simulation to understand is just sim. A factor model (fx) and perhaps fy with intercorrelations between the two factor sets of Phi. This will produce a correlation matrix R = fx' phi fy. Factors can differ in their mean values by specifying mu.
The default values for sim.structure is to generate a 4 factor, 12 variable data set with a simplex structure between the factors. This, and the simplex of items (sim.simplex) can also be converted in a STARS model with an autoregressive component (alpha) and a stable trait component (lambda).
Two data structures that are particular challenges to exploratory factor analysis are the simplex structure and the presence of minor factors. Simplex structures sim.simplex will typically occur in developmental or learning contexts and have a correlation structure of r between adjacent variables and r^n for variables n apart. Although just one latent variable (r) needs to be estimated, the structure will have nvar-1 factors.
An alternative version of the simplex is the State-Trait-Auto Regressive Structure (STARS) which has both a simplex state structure, with autoregressive path alpha and a trait structure with path lambda. This simulated in sim.simplex by specifying a non-zero lambda value.
Many simulations of factor structures assume that except for the major factors, all residuals are normally distributed around 0. An alternative, and perhaps more realistic situation, is that the there are a few major (big) factors and many minor (small) factors. The challenge is thus to identify the major factors. sim.minor generates such structures. The structures generated can be thought of as havinga a major factor structure with some small correlated residuals. To make these simulations complete, the possibility of a general factor is considered. For simplicity, sim.minor allows one to specify a set of loadings to be sampled from for g, fmajor and fminor. Alternatively, it is possible to specify the complete factor matrix.
Another structure worth considering is direct modeling of a general factor with several group factors. This is done using sim.general.
Although coefficient \(\omega\) is a very useful indicator of the general factor saturation of a unifactorial test (one with perhaps several sub factors), it has problems with the case of multiple, independent factors. In this situation, one of the factors is labelled as ``general'' and the omega estimate is too large. This situation may be explored using the sim.omega function with general left as NULL. If there is a general factor, then results from sim.omega suggests that omega estimated either from EFA or from SEM does a pretty good job of identifying it but that the EFA approach using Schmid-Leiman transformation is somewhat more robust than the SEM approach.
The four irt simulations, sim.rasch, sim.irt, sim.npl and sim.npn, simulate dichotomous items following the Item Response model. sim.irt just calls either sim.npl (for logistic models) or sim.npn (for normal models) depending upon the specification of the model.
The logistic model is $$P(i,j) = \gamma + \frac{\zeta-\gamma}{1+ e^{\alpha(\delta-\theta)}}$$ where \(\gamma\) is the lower asymptote or guesssing parameter, \(\zeta\) is the upper asymptote (normally 1), \(\alpha\) is item discrimination and \(\delta\) is item difficulty. For the 1 Paramater Logistic (Rasch) model, gamma=0, zeta=1, alpha=1 and item difficulty is the only free parameter to specify.
For the 2PL and 2PN models, a = \(\alpha\) and d = \(\delta\) are specified.
For the 3PL or 3PN models, items also differ in their guessing parameter c =\(\gamma\).
For the 4PL and 4PN models, the upper asymptote, z= \(\zeta\) is also specified.
(Graphics of these may be seen in the demonstrations for the logistic function.)
The normal model (irt.npn calculates the probability using pnorm instead of the logistic function used in irt.npl, but the meaning of the parameters are otherwise the same. With the a = \(\alpha\) parameter = 1.702 in the logistic model the two models are practically identical.
In parallel to the dichotomous IRT simulations are the poly versions which simulate polytomous item models. They have the additional parameter of how many categories to simulate. In addition, the sim.poly.ideal functions will simulate an ideal point or unfolding model in which the response probability varies by the distance from each subject's ideal point. Some have claimed that this is a more appropriate model of the responses to personality questionnaires. It will lead to simplex like structures which may be fit by a two factor model. The middle items form one factor, the extreme a bipolar factor.
By default, the theta parameter is created in each function as normally distributed with mean mu=0 and sd=1. In the case where you want to specify the theta to be equivalent from another simulation or fixed for a particular experimental condition, either take the theta object from the output of a previous simulation, or create it using whatever properties are desired.
The previous functions all assume one latent trait. Alternatively, we can simulate dichotomous or polytomous items with a particular structure using the sim.poly.mat function. This takes as input the population correlation matrix, the population marginals, and the sample size. It returns categorical items with the specified structure.
Other simulation functions in psych are:
sim.structure A function to combine a measurement and structural model into one data matrix. Useful for understanding structural equation models. Combined with structure.diagram to see the proposed structure.
sim.congeneric A function to create congeneric items/tests for demonstrating classical test theory. This is just a special case of sim.structure.
sim.hierarchical A function to create data with a hierarchical (bifactor) structure.
sim.item A function to create items that either have a simple structure or a circumplex structure.
sim.circ Create data with a circumplex structure.
sim.dichot Create dichotomous item data with a simple or circumplex structure.
sim.minor Create a factor structure for nvar variables defined by nfact major factors and nvar/2 ``minor" factors for n observations.
Although the standard factor model assumes that K major factors (K << nvar) will account for the correlations among the variables
$$R = FF' + U^2$$ where R is of rank P and F is a P x K matrix of factor coefficients and U is a diagonal matrix of uniquenesses. However, in many cases, particularly when working with items, there are many small factors (sometimes referred to as correlated residuals) that need to be considered as well. This leads to a data structure such that $$R = FF' + MM' + U^2$$ where R is a P x P matrix of correlations, F is a P x K factor loading matrix, M is a P x P/2 matrix of minor factor loadings, and U is a diagonal matrix (P x P) of uniquenesses.
Such a correlation matrix will have a poor \(\chi^2\) value in terms of goodness of fit if just the K factors are extracted, even though for all intents and purposes, it is well fit.
sim.minor will generate such data sets with big factors with loadings of .6 to .8 and small factors with loadings of -.2 to .2. These may both be adjusted.
sim.parallel Create a number of simulated data sets using sim.minor to show how parallel analysis works. The general observation is that with the presence of minor factors, parallel analysis is probably best done with component eigen values rather than factor eigen values, even when using the factor model.
sim.anova Simulate a 3 way balanced ANOVA or linear model, with or without repeated measures. Useful for teaching research methods and generating teaching examples.
sim.multilevel To understand some of the basic concepts of multilevel modeling, it is useful to create multilevel structures. The correlations of aggregated data is sometimes called an 'ecological correlation'. That group level and individual level correlations are independent makes such inferences problematic. This simulation allows for demonstrations that correlations within groups do not imply, nor are implied by, correlations between group means.
Revelle, W. (in preparation) An Introduction to Psychometric Theory with applications in R. Springer. at https://personality-project.org/r/book/
See above
# NOT RUN {
simplex <- sim.simplex() #create the default simplex structure
lowerMat(simplex) #the correlation matrix
#create a congeneric matrix
congeneric <- sim.congeneric()
lowerMat(congeneric)
R <- sim.hierarchical()
lowerMat(R)
#now simulate categorical items with the hierarchical factor structure.
#Let the items be dichotomous with varying item difficulties.
marginals = matrix(c(seq(.1,.9,.1),seq(.9,.1,-.1)),byrow=TRUE,nrow=2)
X <- sim.poly.mat(R=R,m=marginals,n=1000)
lowerCor(X) #show the raw correlations
#lowerMat(tetrachoric(X)$rho) # show the tetrachoric correlations (not run)
#generate a structure
fx <- matrix(c(.9,.8,.7,rep(0,6),c(.8,.7,.6)),ncol=2)
fy <- c(.6,.5,.4)
Phi <- matrix(c(1,0,.5,0,1,.4,0,0,0),ncol=3)
R <- sim.structure(fx,Phi,fy)
cor.plot(R$model) #show it graphically
simp <- sim.simplex()
#show the simplex structure using cor.plot
cor.plot(simp,colors=TRUE,main="A simplex structure")
#Show a STARS model
simp <- sim.simplex(alpha=.8,lambda=.4)
#show the simplex structure using cor.plot
cor.plot(simp,colors=TRUE,main="State Trait Auto Regressive Simplex" )
dichot.sim <- sim.irt() #simulate 5 dichotomous items
poly.sim <- sim.poly(theta=dichot.sim$theta) #simulate 5 polytomous items that correlate
#with the dichotomous items
# }
Run the code above in your browser using DataLab